Availability: | |
---|---|
Quantity: | |
High-power Knapsack Lawn Mower
Description:
Our knapsack lawn mower adopts imported four-stroke engine, 12000W high power, easy operation. The carburetor adopts the carburetor imported from Germany, and the fuel is fully burned, which can save fuel. The replacement of the cutter head can meet the operation needs of different occasions.
Specification:
Model | BKGS-GCJ9900W | BKGS-GCJ12000W |
Engine form | Single cylinder, air-cooled engine | Single cylinder, air-cooled engine |
engine capacity | 58cc | 58cc |
Operation method | Piggyback | Piggyback |
Maximum power | 9900W/9000(r/min) | 12000W/9000(r/min) |
Horsepower | 3.5HP | 3.5HP |
Engine oil | Four-stroke engine oil (4T) | Four-stroke engine oil (4T) |
Gasoline | Gasoline above 90# | Gasoline above 90# |
Net weight | 9KG | 9KG |
Fuel consumption | 480g/kw.h | 480g/kw.h |
Advantages:
1. Imported engine, high-power operation, reliable quality.
2. German imported carburetor, the fuel is fully burned, energy-saving and fuel-saving.
3. High-power lawn mower, instead of manual operation, improve work efficiency.
Applicable scene display:
1. Cut the bushes. Professional wasteland reclamation with 40-tooth blade.
2. Cut rice. With the helper, the harvesting efficiency is higher.
3. Loosen the soil. Instead of manual operations, soil loosening and fertilization are simpler.
4. Weeding. Add butter to reduce wear.
5. Mowing the grass. High and low soft and hard, any grass can be easily cut.
6. Cut grass. Lawn trimming, garden maintenance.
Installation steps:
1. Remove the blade fixing screw → 2. Install the lower cover of the blade → 3. Install the blade in the direction shown → 4. Install the upper cover of the blade → 5. Install the fixing nut → 6. Install the dust cover and be firm → 7. Install Anti-slip foam → 8. Install the handle and tighten the screws → 9. Put the baffle in the right position and fix it with the screws → 10. Unscrew the entire operating rod screw and take it out → 11. Insert the flexible shaft into the rod hole → 12. Tighten the screw and fix it→13. Connect the power cord, the big end to the small end, and the male wire to the bus bar→14. Align the flexible shaft core with the shaft hole of the connecting plate→15. The throttle cable is inserted into the groove.
High-power Knapsack Lawn Mower
Description:
Our knapsack lawn mower adopts imported four-stroke engine, 12000W high power, easy operation. The carburetor adopts the carburetor imported from Germany, and the fuel is fully burned, which can save fuel. The replacement of the cutter head can meet the operation needs of different occasions.
Specification:
Model | BKGS-GCJ9900W | BKGS-GCJ12000W |
Engine form | Single cylinder, air-cooled engine | Single cylinder, air-cooled engine |
engine capacity | 58cc | 58cc |
Operation method | Piggyback | Piggyback |
Maximum power | 9900W/9000(r/min) | 12000W/9000(r/min) |
Horsepower | 3.5HP | 3.5HP |
Engine oil | Four-stroke engine oil (4T) | Four-stroke engine oil (4T) |
Gasoline | Gasoline above 90# | Gasoline above 90# |
Net weight | 9KG | 9KG |
Fuel consumption | 480g/kw.h | 480g/kw.h |
Advantages:
1. Imported engine, high-power operation, reliable quality.
2. German imported carburetor, the fuel is fully burned, energy-saving and fuel-saving.
3. High-power lawn mower, instead of manual operation, improve work efficiency.
Applicable scene display:
1. Cut the bushes. Professional wasteland reclamation with 40-tooth blade.
2. Cut rice. With the helper, the harvesting efficiency is higher.
3. Loosen the soil. Instead of manual operations, soil loosening and fertilization are simpler.
4. Weeding. Add butter to reduce wear.
5. Mowing the grass. High and low soft and hard, any grass can be easily cut.
6. Cut grass. Lawn trimming, garden maintenance.
Installation steps:
1. Remove the blade fixing screw → 2. Install the lower cover of the blade → 3. Install the blade in the direction shown → 4. Install the upper cover of the blade → 5. Install the fixing nut → 6. Install the dust cover and be firm → 7. Install Anti-slip foam → 8. Install the handle and tighten the screws → 9. Put the baffle in the right position and fix it with the screws → 10. Unscrew the entire operating rod screw and take it out → 11. Insert the flexible shaft into the rod hole → 12. Tighten the screw and fix it→13. Connect the power cord, the big end to the small end, and the male wire to the bus bar→14. Align the flexible shaft core with the shaft hole of the connecting plate→15. The throttle cable is inserted into the groove.